High Viscosity Material Vertical Kneader

Vertical kneader is use for high viscosity and solid content and dangerous material.

Send Inquiry

Description

The basic principle of vertical kneader

The vertical kneader is a kind of strong shearing effect generated by a pair of vertical blades that cooperate with each other and rotate, so that semi-dry state or rubber-like viscous plastic materials such as high-viscosity and ultra-high-viscosity elastoplastic materials, uniform It is an equipment for mixing, kneading, kneading, crushing, dispersing, and re-agglomerating various chemical products; it has complete functions, many varieties, and is widely used. It has the advantages of uniform mixing, no dead angle, and high kneading efficiency.

For materials with temperature requirements, it can be equipped with a suitable temperature control system for independent operation and high control accuracy.

Performance characteristics of vertical kneader

1. The soft seal between the mechanical seal and the kettle body allows the material to be operated under vacuum;

2. The barrel can be heated by electricity, water and oil circulation. The unique temperature detection device on the drive shaft ensures that the temperature error of the material is less than ±1°C, with a jacket, which can realize heating and cooling;

3. The inner wall of the barrel is finished by a large vertical lathe, and then automatically polished by a large polishing machine to ensure that the movable scraper on the planet carrier can completely hang off the material on the inner wall of the barrel when it rotates;

4. The stirring paddle in the barrel rotates while revolving, so that the material flows up and down and around, so that the mixing (mixing) effect can be achieved in a short time, and the effect is more than ten times that of the horizontal kneader;

5. The revolution and rotation of the agitating paddle in the barrel adopts frequency conversion speed regulation;

6. The kneader is widely used in the mixing, kneading, crushing, stirring, vulcanization and re-polymerization of high-viscosity and high-elastic-plastic materials. The kneader has the advantages of uniform mixing, no dead angle, and high kneading efficiency.