Features Of Dual Planetary Power Mixer

1. High linear speed: The linear speed can reach up to 25m/s, and the dispersion time is greatly shortened; the battery slurry after stirring has small particle size and high consistency, which effectively solves the phenomenon of slurry agglomeration.

2. The bearing adopts Swedish SKF fully imported angular contact ball bearings, which have larger radial and axial loads than traditional deep groove ball bearings, higher carrying capacity, and can withstand higher speeds without deformation, greatly improving the stirring speed and service life (The total service life of continuous 24 hours operation is more than 3 years under the condition of 21m/s linear speed).

3. Zero-to-zero assembly concept: precision assembly, high degree of matching of parts, core components processing accuracy tolerance within 30um (stirring shaft, dispersion shaft and each hole position), thus ensuring concentricity and flatness, realizing the realization of core component assembly Zero to zero. The operation is more stable, and the noise is less than 70db(A) from one meter away.

4. High sealing performance, no oil leakage and air leakage: two sets of mechanical seals plus soft and hard seals, the planetary transmission box adopts a fully sealed structure, and the bearing positions are newly designed, and the bearing limits are reasonably distributed, thereby reducing the bearing Wear and tear; the vacuum degree is no-load for 24 hours and the pressure is above -0.092 to ensure that there is no oil leakage during the mixing process.

5. The gap between the paddle and the inner wall of the barrel: the gap between the paddle and the paddle, the paddle and the barrel wall, and the paddle and the bottom of the barrel is reasonable; the bottom of the stirring paddle has a scraping design, and the roundness of the barrel is high, less than 0.2mm.

6. Large torque output: the stirring blade is made of stainless steel 316L precision casting (a special steel material is used above 650L, which has the ability to self-repair with micro-deformation, so that the stirring blade will not be deformed due to long-term high-torque operation), and the output torque is calculated by computer simulation, High strength, suitable for high-viscosity, high-solid content lithium ion power battery positive and negative slurry (lithium iron phosphate, ternary, ternary high nickel, potassium manganate, lithium cobalt oxide, etc.), and can adapt to different processes (dry method) Mixing, wet mixing).